MaximumPC – 1. Mount the Power Supply
Traditionally, the PSU is mounted at the top of the case. But in this instance, the Antec Three Hundred case reserved room for the power supply at the bottom. Start by removing the four screws that are meant to hold the PSU in place. Then, slide the unit down into place, making sure you keep the wires inside the case and avoid pinching any underneath the power supply. This Power Supply should be oriented so that the rear fan is to the left of the power switch. With the screwdriver, insert the four screws into the appropriate slots to finish mounting the power supply.
2. Drop in the CPU
Erectile dysfunction levitra from canada can occur due to psychological reasons in quite a few people. When it comes cialis store to love men can not resist the beauty of this phenomenon. One of the reasons that this tablet works is because it has this ingredient, which can easily be absorbed into the blood after consuming it and its effect can be experienced by having longer love making sessions. order viagra sample djpaulkom.tv Is it djpaulkom.tv generico levitra on line not enough to encourage you to buy Kamagra for your treatment? So, order kamagra oral jelly online today to plan a special week end this week. You may have thought with the end of CPU pins that installing your processor was safe and worry-free. It can be, but if you’re not careful, installing your new CPU can still bork your mobo. It’s still one of the most delicate steps in building a PC, which is why we usually recommend installing the CPU before you mount the motherboard in the case. First, remove the black protective shield covering the socket and store it in a place you won’t forget. It’s good practice to save this plastic covering since most motherboard manufacturers require it to be in place if you ever need to RMA a defective board.
