PCI express status test - service center 7.9

[weaver00]

I am getting a 'FAILED', fatal device error detected on Standard dual channel PCI IDE controller. I have checked all suspects and cannot find the problem. How can I trace the actual component rererred to?

[James_PCD]

Hello Weaver00,

PCI
This test verifies the PCI bus can successfully communicate with attached devices. All PCI devices are detected and their configuration space checked. If the test does not detect any PCI devices or there are errors checking device configuration spaces, it logs as Failed.

With what I have listed above, one should be able to remove PCI devices and test them one by one and/or slot by slot to narrow down the failing component.