Hi, I just ran a Motherboard/Video test and I'm a little confused about the keyboard POST test. When I ran the test I had a USB keyboard plugged in, so my question is...did the test fail because I had a USB keyboard or is there something wrong with the PS/2 ports? Below are the test results for all to see.
PC-DOCTOR 3.0.1590 SYSTEM TEST LOG
==================================
System Serial Number: 28006131-3006501
This file was created 1/3/2009 at 17:19
Batch Mode: 5 - Motherboard/Video Test
Testing Started 01/03/2009 17:19:43
System Timer............................PASSED
BIOS Timer..............................PASSED
IRQ Controller..........................PASSED
DMA Channels............................PASSED
RAM Refresh.............................PASSED
RTC Clock...............................PASSED
CMOS RAM................................PASSED
Keyboard................................
Keyboard Power-On Selftest Failed
Expected FAH. Read FEH.
Keyboard FAILED 01/03/2009 17:20
External Cache..........................N/A
PCI.....................................PASSED
PCMCIA..................................N/A
USB Port................................PASSED
IEEE1394 Controller.....................PASSED
Video Memory............................PASSED
Video Pages.............................PASSED
VGA Controller Registers................PASSED
VGA Color-DAC Registers.................PASSED
VESA Full Video Memory Test.............PASSED
AGP.....................................
No AGP video card detected
AGP N/A
PCI Express.............................
No PCI Express video card detected
PCI Express N/A
LPT 1 Command And Data Port.............PASSED
SCSI....................................
No SCSI CAM or ASPI driver found.
SCSI N/A
SMBUS...................................PASSED
Testing Completed 01/03/2009 17:22:11
