Author Topic: Motherboard  (Read 2967 times)

Offline rob.kraanen

  • Newbie
  • *
  • Posts: 1
Hi, I have just recieved Service Center 7. I have a Dell Dimension 4400 and I suspect the motherboard is broken. How do I test this. It doesn't start up anymore (at least there is no display). I tested the powersuply which is good. I don't know how to test the graphic card as well without display on the screen?

Please let me know how to start this.

Kind regards,

Rob Kraanen
rob.kraanen

Offline fwilson

  • Hero Member
  • *****
  • Posts: 779
Rob,

In a non responsive system the only tests that can be done are the power supply and the POST card test.  The POST card test will give you a clue as to where the system is hanging in the POST process by displaying the last POST code the system generated.

-Fred
“Integrity is doing the right thing, even if nobody is watching.”  ~ J.C. Watts

Offline pclaptech

  • Newbie
  • *
  • Posts: 4
Please let me know step by step instruction how to do post card test for dead system with out video.

Offline fwilson

  • Hero Member
  • *****
  • Posts: 779
pclaptech,

Use the POST card to see where the system is hanging during POST.

I gave you the instructions in a previous POST http://www.pcdoctor-community.com/forum/index.php?topic=399.0.

Alternatively you could put another Video card in and see if you get a response on the screen.

-Fred
“Integrity is doing the right thing, even if nobody is watching.”  ~ J.C. Watts